NISSAN 2012 LEAF - Owner's Manual - Manual (Page 228)

Manual operation
The manual mode can be used to control the
heater and air conditioner to your desired
settings.
To turn off the heater and air conditioner, push
the A/C-Heater ON·OFF button.
Fan speed control:
Push “+” of the fan speed control button to
increase the fan speed.
Push “ −” of the fan speed control button to
increase the fan speed.
Push the AUTO button to change the fan speed
to the automatic mode.
Air flow control:
Push the MODE button to change the air flow
mode.
— Air flows from the center and side
ventilators.
— Air flows from the center and side
ventilators and foot outlets.
— Air flows mainly from the foot outlets.
— Air flows from the defroster outlets and
foot outlets.
Temperature control:
Push the temperature control , button
to set the desired temperature.
The temperature range is between 64 8F (188C)
and 90 8F (328C).
Air recirculation:
Push the air recirculation button to change
the air circulation mode. When the indicator light
illuminates, the flowing air is recirculated inside
the vehicle.
Outside air circulation:
Push the outside air circulation button to
change the air circulation mode. When the
indicator light illuminates, the flowing air is
drawn from outside the vehicle.
Automatic air intake control:
To set the automatic control mode, perform one
of the following operations.
. When the outside air circulation mode is on,
push and hold the outside air circulation
button for more than 1.5 seconds.
. When the air recirculation mode is on, push
and hold the air recirculation button for
more than 1.5 seconds.
When setting the automatic control mode, both
indicator lights will blink twice indicating that the
system is in the automatic control mode.
CLIMATE CTRL. TIMER
The air conditioner starts to operate at the time
of day and day of the week specified in the
settings. This pre heats or pre cools the vehicle
to a factory preset temperature in the passenger
compartment before driving while the charger is
connected to vehicle. This help reduce power
consumption from the Li-ion battery.
As the temperature is set to the factory default
setting, the user cannot adjust the temperature.
The Climate Ctrl. Timer operates the air condi-
tioner using power from the charger. Electric
power from the Li-ion battery is not used.
The Climate Ctrl. Timer function allows two
different timer settings. Each timer charge
function can be set to activate on a different
day of the week.
Once the Climate Ctrl. Timer is set, it auto-
matically starts when the set time is reached. It is
therefore not necessary to set the Climate Ctrl.
Timer everyday.
Ventilators and climate control systems 4-7