NISSAN 2012 LEAF - Owner's Manual - Manual (Page 252)

PRECAUTIONS ON CRUISE CON-
TROL
. If the cruise control system malfunctions, it
will cancel automatically. The SET indicator
on the dot matrix crystal display will then
blink to warn the driver.
. If the SET indicator on the dot matrix crystal
display blinks, turn the cruise control MAIN
switch off and have the system checked by a
NISSAN certified LEAF dealer.
. The SET indicator on the dot matrix crystal
display may blink when the cruise control
MAIN switch is turned ON while pushing the
RESUME/ACCELERATE, SET/COAST or
CANCEL switch. To properly set the cruise
control system, perform the following pro-
cedure.
WARNING
Do not use the cruise control when
driving under the following conditions:
. when it is not possible to keep the
vehicle at a set speed
. in heavy traffic or in traffic that
varies in speed
. on winding or hilly roads
. on slippery roads (rain, snow, ice,
etc.)
. in very windy areas
Doing so could cause a loss of vehicle
control and result in an accident.
1. RESUME/ACCELERATE switch
2. SET/COAST switch
3. CANCEL switch
4. MAIN (ON·OFF) switch
CRUISE CONTROL OPERATION
The cruise control allows driving at a speed
between 25 to 89 MPH (40 to 144 km/h)
without keeping your foot on the accelerator
pedal.
To turn on the cruise control, push the MAIN
switch on. The CRUISE indicator on the dot
matrix crystal display will illuminate.
To set the cruising speed, accelerate the
vehicle to the preferred speed, push the SET/
Starting and driving 5-17
CRUISE CONTROL