First drive features – NISSAN 2015 Murano - Quick Reference Guide User Manual
Page 22
To view detailed instructional videos regarding these and other features,
please go to www.nissanownersinfo.mobi.
20
INTELLIGENT CRUISE CONTROL (ICC) SYSTEM (if so equipped)
VEHICLE-TO-VEHICLE DISTANCE CONTROL MODE
To set Vehicle-To-Vehicle Distance Control mode, press the CRUISE ON/OFF button
1
. The CRUISE indicator light
2
will illuminate.
Accelerate to the desired speed.
Push down on the SET/- switch
3
and release
it. Intelligent Cruise Control will be set to the
desired speed.
Press the distance button
4
repeatedly to
change the set distance between long, middle
and short.
When a vehicle is not detected ahead of you in
the lane, the set distance and set vehicle speed
indicator lights will illuminate
5
in set mode.
When a vehicle is detected ahead of you in the lane, the vehicle
ahead detection, set distance and set vehicle speed indicator lights
will illuminate
6
in set mode.
To reset at a faster cruising speed, push and hold the RES/+
switch
7
. When the vehicle attains the desired speed, release
the switch.
To reset at a slower cruising speed, push and hold the
SET/- switch
3
. Release the switch when the vehicle slows to the desired speed.
To cancel the preset speed, push the CANCEL switch
8
or tap the brake pedal. The
set vehicle speed indicator
5
will extinguish.
To turn off Intelligent Cruise Control, press the CRUISE ON/OFF button
1
. The
CRUISE indicator light
2
in the instrument panel will extinguish.
To set conventional (fixed speed) cruise control mode:
When one of the two cruise modes is in use, you must press and hold the CRUISE
ON/OFF button
1
for longer than 1 second to activate conventional Cruise Control
and the Intelligent Cruise Control light will extinguish.
Accelerate to the desired speed.
Push down on the SET/- switch and release it. The SET indicator light will illuminate.
Cruise Control should be set to the desired speed.
To switch between the two Cruise Control modes:
When one of the two cruise modes is in use, you must press and hold the CRUISE
ON/OFF button
1
for longer than 1 second to activate conventional Cruise Control.
For more information, refer to the “Starting and driving (section 5)” of your Owner’s Manual.
2
5
6
FIRST DRIVE FEATURES
1
4
8
7
3
1705374_15a_Murano_QRG_091214b.indd 20
9/12/14 10:46 AM