Blind spot warning (bsw) system (if so equipped), Vehicle dynamic control (vdc), Hill start assist (hsa) system – NISSAN 2015 Murano - Quick Reference Guide User Manual

Page 7

Advertising
background image

To view detailed instructional videos regarding these and other features,

please go to www.nissanownersinfo.mobi.

5

BLIND SPOT WARNING (BSW) SYSTEM (if so equipped)

The BSW system alerts the driver when another

vehicle moves into the vehicle’s blind spot area.

An indicator light near the driver’s outside mirror

1

will illuminate if the radar sensors detect a

vehicle in the detection zone.

The indicator light will first illuminate in orange and

then turn green while the system is on. This indicates that the BSW
system is operational.

For more information, refer to the “Starting and driving (section 5)” of your Owner’s Manual.

VEHICLE DYNAMIC CONTROL (VDC)

Always make sure VDC is ON by ensuring the VDC OFF light is

not on before driving the vehicle.

The VDC OFF

1

switch should only be used briefly to help free

the vehicle if stuck in snow or mud.

For more information, refer to the “Starting and driving (section 5)” and the “Instruments and controls (section 2)
of your Owner’s Manual.

PREDICTIVE FORWARD COLLISION WARNING (PFCW) SYSTEM

(if so equipped)

The PFCW system can help alert the driver of sudden braking by the second vehicle

traveling ahead of your vehicle in the same lane.

If there is a potential risk, the PFCW will warn the driver with a blinking driver assist

system forward indicator and an audible warning tone will be heard.

For more information, refer to the “Starting and driving (section 5)” in your Owner’s Manual.

1

HILL START ASSIST (HSA) SYSTEM

The HSA system allows time for the driver to release the brake pedal and apply the
accelerator when the vehicle is parked on a hill. The brakes are applied automatically for 2
seconds after the driver releases the brake pedal.
The Hill Start Assist system will operate automatically under these conditions:
• The shift lever is shifted into a forward or a reverse gear.
• The vehicle is stopped completely on a hill by applying the brake.
The Hill Start Assist system will not operate when the shift lever is in the N (Neutral) or

P (Park) position or on a flat and level road.

For more information, refer to the “Starting and driving (section 5)” of your Owner’s Manual.

1

1705374_15a_Murano_QRG_091214b.indd 5

9/12/14 10:46 AM

Advertising