NISSAN 2014 Pathfinder Hybrid - Dismantling Guide - Manual (Page 22)

Powering Down the High Voltage System
The high voltage system can be shut down with any 1 of the following procedures:
• Turn OFF the power switch and disconnect the 12V battery. Refer to Primary Procedure (DG–23) .
• Remove the underhood fuse for the high voltage control system and disconnect the 12V battery.
Refer to Alternate Procedure 1 (Removing Fuses) (DG–25) .
• Remove the service plug and disconnect the 12V battery. Refer to Alternate Procedure 2 (Remove
Service Plug) (DG–27) .
DG–22