2 shift selector lever lock release – NISSAN 2014 Pathfinder Hybrid - Dismantling Guide User Manual

Page 38

Advertising
background image

7. Start the engine of the booster vehicle and let it run for a few minutes.
8. Hold down the brake pedal and press the START button. The vehicle instruments and gauges will

light up, and the green READY light

will come ON.

If the green READY

light does not come on, press the START button to turn the

Hybrid System OFF. Carefully disconnect the negative cable then the positive cable. Have
the vehicle taken to a Nissan dealer for repair.

9. After the green READY

light in the meter display comes ON, carefully disconnect the

negative cable and then the positive cable.

10. Replace the vent caps (if so equipped). Be sure to dispose of the cloth used to cover the vent

holes as it may be contaminated with corrosive acid.

11. Reinstall the fuse box cover.

NOTE:

If it is not possible to turn the hybrid system ON by following this procedure, contact a
Nissan dealer immediately.

4-2 Shift Selector Lever Lock Release

If the 12V battery is low or discharged, the selector lever cannot be moved from the Park (P) position. If a booster bat-
tery is not available, the selector lever lock can be manually released. To manually release the selector lever lock, perform
the following procedure:

1. Push the ignition switch to the LOCK or OFF position.
2. Apply the parking brake.
3. Remove the shift lock cover (A) using a suitable tool.
4. Push down the shift lock (B) using a suitable tool as

shown in the illustration.

5. Push the selector lever button (C) and move the selector

lever to the Neutral (N) position (D) while holding down
the shift lock.

B

A

C

D

AAYIA0337ZZ

DG–38

Advertising