NISSAN 2014 Pathfinder Hybrid - Dismantling Guide - Manual (Page 47)

20. Disconnect harness connector (1) from Li-ion battery.
Immediately protect the terminals of the disconnected
high voltage harness connector socket using insulated
tape so that they are not exposed.
Touching high voltage components without wearing
appropriate Personal Protective Equipment (PPE) will
cause electrocution.
21. Remove nut (A) and disconnect DC/DC converter
ground (1).
Touching high voltage components without wearing
appropriate Personal Protective Equipment (PPE) will
cause electrocution.
22. Release clip, then disconnect harness connector (1)
from DC/DC converter.
Touching high voltage components without wearing
appropriate Personal Protective Equipment (PPE) will
cause electrocution.
23. Remove nuts (A) and battery inlet duct B (1).
Touching high voltage components without wearing
appropriate Personal Protective Equipment (PPE) will
cause electrocution.
1
AAYIA0286ZZ
A
1
AAYIA0287ZZ
1
AAYIA0288ZZ
1
A
AAYIA0289ZZ
DG–47