3rd row bench seat adjustment -8 – NISSAN 2014 Pathfinder Hybrid - Owner's Manual User Manual

Page 104

Advertising
background image

WARNING

When returning the seat to its original
position, confirm that the seat and seat-
back are locked properly.

Be careful not to pinch your hand or foot
or bump your head when operating the
walk-in seat.

3RD ROW BENCH SEAT
ADJUSTMENT

Reclining

To recline the seatback, pull up on the latch
located on the outside corner of each seatback.
Lean back until the desired angle is obtained.

To bring the seatback forward again, pull up on
the latch and pull the seatback upright until the
desired angle is obtained.

The recline feature allows adjustment of the seat-
back for occupants of different sizes for added
comfort and to help obtain proper seat belt fit.
See “Precautions on seat belt usage” later in this
section. Also, the seatback can be reclined to
allow occupants to rest when the vehicle is
stopped and the shift lever is in P (Park).

WARNING

After adjustment, gently rock in the seat

to make sure it is securely locked.

Do not ride in a moving vehicle when

the seatback is reclined. This can be
dangerous. The shoulder belt will not
be against your body. In an accident,
you could be thrown into it and receive
neck or other serious injuries. You
could also slide under the lap belt and
receive serious internal injuries.

For the most effective protection when

the vehicle is in motion, the seat should
be upright. Always sit well back in the
seat and adjust the seat belt properly.
See “Precautions on seat belt usage”
later in this section.

Outboard seats

LRS2147

1-8

Safety—Seats, seat belts and supplemental restraint system

Advertising