Lights -25, Headlights -25 fog lights (if so equipped) -25 – NISSAN 2014 Pathfinder Hybrid - Owner's Manual User Manual

Page 515

Advertising
background image

NOTE:

Changes or modifications not expressly ap-
proved by the party responsible for compli-
ance could void the user’s authority to op-
erate the equipment.

For Canada:
This device complies with RSS-210 of In-
dustry Canada. Operation is subject to the
following two conditions: (1) this device
may not cause interference, and (2) this
device must accept any interference, in-
cluding interference that may cause unde-
sired operation of the device.

HEADLIGHTS
Replacing the halogen headlight bulb

If bulb replacement is required, see your NISSAN
dealer.

CAUTION

Aiming is not necessary after replacing

the bulb. When aiming adjustment is
necessary, contact a NISSAN dealer.

Do not leave the headlight assembly

open without a bulb installed for a long
period of time. Dust, moisture, smoke,
etc. entering the headlight body may
affect bulb performance. Remove the
bulb from the headlight assembly just
before a replacement bulb is installed.

Only touch the base when handling the

bulb. Never touch the glass envelope.
Touching the glass could significantly
affect

bulb

life

and/or

headlight

performance.

High pressure halogen gas is sealed

inside the halogen bulb. The bulb may
break if the glass envelope is scratched
or the bulb is dropped.

Use the same number and wattage as

shown in the chart.

Fog may temporarily form inside the lens of the
exterior lights in the rain or in a car wash. A
temperature difference between the inside and
the outside of the lens causes the fog. This is not
a malfunction. If large drops of water collect
inside the lens, contact a NISSAN dealer.

FOG LIGHTS (if so equipped)

Replacing the fog light bulb

If replacement is required, see your NISSAN
dealer.

CAUTION

High pressure halogen gas is sealed

inside the halogen bulb. The bulb may
break if the glass envelope is scratched
or the bulb is dropped.

When handling the bulb, do not touch

the glass envelope.

Use the same number and wattage as

originally installed as shown in the
chart.

Do not leave the bulb out of the fog light

for a long period of time as dust, mois-
ture and smoke may enter the fog light
body and affect the performance of the
fog light.

LIGHTS

Maintenance and do-it-yourself

8-25

Advertising