NISSAN 2014 Pathfinder Hybrid - Owner's Manual User Manual

Page 138

Advertising
background image

4. Allow the seat belt to retract. Pull up on the

shoulder belt to remove any slack in the belt.

5. Remove any additional slack from the seat

belt; press downward and rearward firmly in
the center of the child restraint to compress
the vehicle seat cushion and seatback while
pulling up on the seat belt.

6. After attaching the child restraint, test it be-

fore you place the child in it. Push it from side
to side while holding the child restraint near
the seat belt path. The child restraint should
not move more than 1 in (25 mm), from side
to side. Try to tug it forward and check to see
if the belt holds the restraint in place. If the
restraint is not secure, tighten the seat belt
as necessary, or put the restraint in another
seat and test it again. You may need to try a
different child restraint. Not all child re-
straints fit in all types of vehicles.

Rear-facing – step 4

LRS0670

Rear-facing – step 5

WRS0762

Rear-facing – step 6

WRS0763

1-42

Safety—Seats, seat belts and supplemental restraint system

Advertising