Push-button ignition switch -10 – NISSAN 2014 Pathfinder Hybrid - Owner's Manual User Manual

Page 442

Advertising
background image

Failure to operate this vehicle correctly

could result in loss of control and/or a
rollover accident.

Always use tires of the same type, size,

brand, construction (bias, bias-belted,
or radial), and tread pattern on all four
wheels. Install tire chains on the front
wheels when driving on slippery roads
and drive carefully.

Be sure to check the brakes immedi-

ately after driving in mud or water. See
“Brake system” later in this section for
“Wet brakes”.

Avoid parking your vehicle on steep

hills. If you get out of the vehicle and it
rolls forward, backward or sideways,
you could be injured.

Whenever you drive off-road through

sand, mud or water as deep as the
wheel hub, more frequent maintenance
may be required. See “Periodic mainte-
nance” in the “NISSAN Service and
Maintenance Guide.”

WARNING

Do not operate the push-button ignition
switch while driving the vehicle except in
an emergency. (The engine will stop when
the ignition switch is pushed 3 consecu-
tive times in quick succession or the igni-
tion switch is pushed and held for more
than 2 seconds.) If the engine stops while
the vehicle is being driven, this could lead
to a crash and serious injury.

When the ignition switch is pushed without de-
pressing the brake pedal, the ignition switch will
illuminate.

Push the ignition switch center:

● once to change to ACC.
● two times to change to ON.
● three times to return to OFF.

The ignition switch will automatically return to the
LOCK position when any door is either opened or
closed with the switch in the OFF position.

LSD2014

PUSH-BUTTON IGNITION SWITCH

5-10

Starting and driving

Advertising