NISSAN 2012 Quest - Owner's Manual - Manual (Page 212)

Black plate (209,1)
[ Edit: 2011/ 10/ 27 Model: E52-D ]
SAA2404
Models with navigation system
SAA2606
Models without navigation system
PREDICTIVE COURSE LINE SETTINGS
(if so equipped)
To turn ON or OFF the predictive course line
display, push the SETTING button, select the
“Camera” key and push the ENTER button.
Predictive Course Lines:
When this item is turned on, the predicted
course lines will be displayed on the monitor
when the selector lever is in the R (Reverse)
position.
HOW TO ADJUST THE SCREEN
. Models with Center Multi-function Control
Panel
To adjust the Display ON/OFF, Brightness,
Tint, Color, Contrast and Black Level of the
RearView Monitor, push the SETTING but-
ton with the RearView Monitor on, select the
item key and adjust the level using the multi-
function controller.
Do not adjust the Brightness, Tint, Color,
Contrast and Black Level of the RearView
Monitor while the vehicle is moving. Make
sure the parking brake is firmly applied and
the engine is not running.
The display of the predicted course lines
can be set to ON or OFF. For details, see
“CAMERA settings” (P.4-22).
. Models without Center Multi-function Con-
trol Panel
To set up the RearView Monitor to your
preferred settings, push the SETTING but-
ton while the RearView Monitor screen is
displayed. Each time the SETTING button is
pushed, the next setting item is selected.
Turn the TUNE·SCROLL control knob to
adjust each item.
Available setting items:
— Brightness
— Contrast
The setting items will disappear and the
display will return to the original screen if
SETTING button is pushed when the last
setting item is selected or if the screen is left
without operation for some time. For details,
see “FM-AM-SAT radio with Compact Disc
(CD) player (Type A)” (P.4-64).
OPERATING TIPS
. When the selector lever is shifted to the R
(Reverse) position, the monitor screen auto-
matically changes to the RearView Monitor
mode. However, the radio can be heard.
. It may take some time until the RearView
Monitor or the normal screen is displayed
after the selector lever has been shifted to R
from another position or to another position
from R. Objects may be distorted momenta-
Monitor, heater, air conditioner, audio, phone and voice recognition systems 4-29