NISSAN 2012 Quest - Owner's Manual - Manual (Page 245)

Black plate (242,1)
[ Edit: 2011/ 10/ 27 Model: E52-D ]
4-62 Monitor, heater, air conditioner, audio, phone and voice recognition systems
automatically turn off and the CD will start
playing.
After loading the CD, the number of tracks and
the play time will appear on the display.
CD button:
When the CD button is pushed while the audio
system is off and CDs are loaded, the audio
system will turn on and a CD will start playing.
If another audio source is playing when the CD
button is pushed with CDs loaded, the audio
source will automatically turn off and a CD will
start playing.
button:
To display the CD text on the screen (text
programmed CD only), push the DISP button
while a CD is being played. The following CD
text will be displayed on the screen.
(CD)
(CD with MP3 or WMA)
Scroll (SCRL) button:
When the title long, the whole title will not be
shown in the display. In this case, push the
SCRL button to scroll the title. When the title is
scrolled to the end, the display will stop moving
and return to the first condition.
SEEK/TRACK/FILE button:
When the or button is pushed for less
than 1.5 seconds while a CD is being played,
the next track or the beginning of the current
track on the CD will be played.
When the or button is pushed for more
than 1.5 seconds while a CD is being played,
the SCAN indicator will be displayed and each
track will play for about 10 seconds in succes-
sion. To stop at the current track, push the
button again for more than 1.5 seconds.
TUNE/FF·REW/FOLDER but-
ton:
When the or button is pushed for more
than 1.5 seconds while a CD is being played,
the CD will be played while forwarding or
rewinding. When the button is released, the
CD will return to the normal play speed.
When the or button is pushed for less
than 1.5 seconds while a CD with MP3 or WMA
is being played, the first track in the next or the
previous folder will be played.
to CD select buttons:
To change to another CD already loaded in the
CD changer, push the corresponding CD select
button
to .
button:
When the RPT button is pushed while a CD is
being played, the play pattern can be changed
as follows:
(CD)
(CD with MP3 or WMA)
RDM (random) button:
To change the play sequence, push the button
to select the mode.
(CD)