Shifting – NISSAN 2015 Sentra - Owner's Manual User Manual

Page 282

Advertising
background image

To move the shift lever:

Push the button

A

while depressing the

brake pedal

Push the button

A

to shift

Shift without pushing button

A

Shifting

After starting the engine, fully depress the brake
pedal and move the shift lever from P (Park) to
any of the desired shift positions.

WARNING

Apply the parking brake if the shift lever

is in any position while the engine is not
running. Failure to do so could cause
the vehicle to move unexpectedly or roll
away and result in serious personal in-
jury or property damage.

If the key is turned to the OFF or ACC position for
any reason while the vehicle is in N (Neutral), or
any drive position, the key cannot be turned to the
LOCK position and be removed from the ignition
switch. If this occurs, perform the following steps:

1. Apply the parking brake when the vehicle is

stopped.

2. Move the shift lever to P (Park) to park the

vehicle and turn the ignition switch to the
LOCK position to remove the key.

P (Park)

CAUTION

To prevent transmission damage, use the
P (Park) or R (Reverse) position only when
the vehicle is completely stopped.

Use the P (Park) shift lever position when the
vehicle is parked or when starting the engine.

Make sure the vehicle is completely stopped.
The brake pedal must be depressed and
the shift lever button pushed in to move the
shift lever from N (Neutral) or any drive
position to P (Park).
Apply the parking brake.
When parking on a hill, apply the parking brake
first, then place the shift lever into the P (Park)
position.

R (Reverse)

CAUTION

To prevent transmission damage, use the
P (Park) or R (Reverse) position only when
the vehicle is completely stopped.

Use the R (Reverse) position to back up. Make
sure the vehicle is completely stopped before
selecting R (Reverse) position. The brake
pedal must be depressed and the shift lever
button pushed in to move the shift lever
from P (Park), N (Neutral) or any drive po-
sition to R (Reverse).

N (Neutral)

Neither forward nor reverse gear is engaged. The
engine can be started in this position. You may
shift to N (Neutral) and restart a stalled engine
while the vehicle is moving.

LSD2131

Starting and driving

5-17

Advertising