Installing top tether strap -34 – NISSAN 2015 Sentra - Owner's Manual User Manual

Page 51

Advertising
background image

10. If the child restraint is installed in the front

passenger seat, place the ignition switch in
the ON position. The front passenger air bag
status light

should illuminate. If this

light is not illuminated, refer to “Supplemen-
tal air bag warning light” in this section.
Move the child restraint to another
seating

position.

Have

the

system

checked by a NISSAN dealer.

After the child restraint is removed and the seat
belt is fully retracted, the ALR mode (child re-
straint mode) is canceled.

1

Top tether strap

2

Anchor point

INSTALLING TOP TETHER STRAP

The child restraint top tether strap must be used
when installing the child restraint with seat belts.

First, secure the child restraint with the seat belt.

Rear bench seat

1. Position the top tether strap

1

over the

seatback.

2. Secure the tether strap to the tether anchor

point

2

on the rear-parcel shelf behind the

child restraint.

3. Tighten the tether strap according to the

manufacturer’s instructions to remove any
slack.

If you have any questions when installing a
top tether strap, consult your NISSAN
dealer for details.

WARNING

Child restraint anchorages are designed
to withstand only those loads imposed by
correctly fitted child restraints. Under no
circumstances are they to be used to at-
tach adult seat belts, or other items or
equipment to the vehicle. Doing so could
damage the child restraint anchorages.
The child restraint will not be properly
installed using the damaged anchorage,
and a child could be seriously injured or
killed in a collision.

Forward-facing — step 10

WRS0475

Rear seats

LRS2627

1-34

Safety—Seats, seat belts and supplemental restraint system

Advertising