NISSAN 2015 Sentra - Owner's Manual - Manual (Page 345)

REPLACING
Replace the wiper blades if they are worn.
To replace the windshield wiper blades, follow
the procedure below:
1. When ignition switch is ON or within
60 seconds after placing the ignition switch
from the ON to OFF position, place the
windshield wiper and washer lever into the
OFF position.
2. Rapidly lift the windshield wiper and washer
lever
᭺
2 upwards twice within 0.5 seconds.
This action will cause the wipers to auto-
matically take the service position.
3. Once the wipers are in the service position,
push the release tab
᭺
B .
4. Move the wiper blade down
᭺
C and remove.
5. Insert the new wiper blade onto the wiper
arm until it clicks into place.
6. Rotate the wiper blade so the dimple is in the
groove.
7. Finally, lift the windshield wiper and washer
lever to the mist position
᭺
8 once and re-
lease. This action will cause the wipers to
resume the set position.
LDI2396 LDI2475 LDI2397
8-20 Maintenance and do-it-yourself