NISSAN 2015 Titan - Owner's Manual User Manual

Page 283

Advertising
background image

BLUETOOTH® HANDS-FREE
PHONE SYSTEM VOICE
COMMANDS

To access the Bluetooth® Hands-Free Phone
System voice commands:

1. Press the

button.

2. Say “Call” and then a name in the vehicle

phonebook to call that entry. Otherwise, say
“Phone” to access various phone com-
mands.

If the Bluetooth® has been set to “Off”, the
system announces: “Bluetooth® is off. Would
you like to turn Bluetooth® on?”

If no phone is connected to the system and the
vehicle is stationary, the system announces:
“There is no phone connected. Would you like to
connect a phone now?” Say “Yes” to connect a
phone. All further Bluetooth® Hands-Free Phone
System voice commands are only available if a
phone is connected.

If a phone is connected and Bluetooth® is set to
“On”, the following voice commands are available:

● Call (a name)

Speak the name of the contact in which you
are trying to call. System will confirm correct
contact. Say “Dial” to initiate dialing.

● Dial Number

Allows for up to 24 digits to be dialed. After
the number is entered, say “Dial” to initiate
dialing. Say “Correction” to correct the num-
ber entered. Say “Go Back” to return to the
main menu.

● List Phonebook

Starting with the first alphabetical entry in
the vehicle phonebook, the system prompts
for an additional command. Say “Dial” to call
the number of the phonebook entry. Say
“Send Text” to send a text message to the
number of the phonebook entry. Say “Next
Entry” to skip to the next alphabetical entry in
the vehicle phonebook, where the same op-
tions will then be available.

● Recent Calls

The system prompts for an additional com-
mand. Say “Missed Calls”, “Incoming Calls”
or “Outgoing Calls” to display a list of such
calls on the screen.

Speak the number of the entry displayed on
the screen to dial that number or say “Next
Page” to view entries on the next page (if
available).

● Redial

Redials the last called number.

● Read Text

Reads an incoming text message. For addi-
tional information about text messaging with
the Bluetooth® Hands-Free Phone System,
refer to “Bluetooth® Hands-Free Phone
System with Navigation System” in this sec-
tion.

● Send Text

Sends a text message. For additional infor-
mation about text messaging with the
Bluetooth® Hands-Free Phone System, re-
fer to “Bluetooth® Hands-Free Phone Sys-
tem with Navigation System” in this section.

● Select Phone

The system replies “Please use manual con-
trols to continue”. Use manual controls to
change the active phone from among the
listed phones connected to the vehicle.

For additional information about the Bluetooth®
Hands-Free Phone System, refer to “Bluetooth®
Hands-Free Phone System with Navigation Sys-
tem” in this section.

4-100

Monitor, climate, audio, phone and voice recognition systems

Advertising