NISSAN 2015 Titan - Owner's Manual User Manual

Page 362

Advertising
background image

CAUTION

Be careful not to burn yourself. The engine
oil may be hot.

6. Clean and reinstall the drain plug and a new

washer. Securely tighten the drain plug with
a wrench. Do not use excessive force.

Drain plug tightening torque:

34 N·m (26 ft-lb)

7. Refill engine with recommended oil through

the oil filler opening, then install the oil filler
cap securely.

For additional information on drain and refill
capacity,

refer

to

“Recommended

fluids/lubricants and capacities” in the
“Technical and consumer information” sec-
tion of this manual.

The drain and refill capacity depends on the
oil temperature and drain time. Use these
specifications for reference only. Always use
the dipstick to determine when the proper
amount of oil is in the engine.

8. Start the engine. Check for leakage around

the drain plug and oil filter. Correct as re-
quired.

9. Turn the engine off and wait more than

10 minutes. Check the oil level with the
dipstick. Add engine oil if necessary.

2WD (if so equipped)

LDI2627

Maintenance and do-it-yourself

8-11

Advertising