Daytime running lights — if equipped – Dodge 2011 Challenger - Owner Manual User Manual

Page 143

Advertising
background image

To activate the delay feature, place the ignition in the OFF

position while the headlights are still on. Then, turn off

the headlights within 45 seconds. The delay interval

begins when the headlight switch is turned off.
If you turn the headlights or parking lights on, or place

the ignition in the RUN position again, the system will

cancel the delay.
If you turn the headlights off before the ignition, they will

turn off in the normal manner.
NOTE:

The lights must be turned off within 45 seconds

of placing the ignition in the OFF position to activate this

feature.

The Headlight delay time is programmable. Refer to

“Electronic

Vehicle

Information

Center

(EVIC)/

Customer-Programmable Features” in “Understanding

Your Instrument Panel” for further information.

Daytime Running Lights — If Equipped
The high beam headlights will come on as Daytime

Running Lights whenever the ignition is placed in the

RUN position, the headlights are off and the parking

brake is released. The headlight switch must be used for

normal nighttime driving.

3

UNDERSTANDING THE FEATURES OF YOUR VEHICLE 141

Advertising