Seat belt pretensioners, Enhanced seat belt use reminder system, Beltalert௡) – Dodge 2011 Challenger - Owner Manual User Manual

Page 55

Advertising
background image

Seat Belt Pretensioners
The seat belts for both front seating positions are

equipped with pretensioning devices that are designed to

remove slack from the seat belt in the event of an

accident. These devices may improve the performance of

the seat belt by assuring that the belt is tight about the

occupant early in an accident. Pretensioners work for all

size occupants, including those in child restraints.
NOTE:

These devices are not a substitute for proper seat

belt placement by the occupant. The seat belt still must be

worn snugly and positioned properly.
The pretensioners are triggered by the Occupant Re-

straint Controller (ORC). Like the air bags, the preten-

sioners are single use items. A deployed pretensioner or

a deployed air bag must be replaced immediately.

Enhanced Seat Belt Use Reminder System
(BeltAlert
)
BeltAlert௡ is a feature intended to remind the driver and

front passenger (if equipped with front passenger

BeltAlert௡) to fasten their seat belts. This feature is active

whenever the ignition is on. If the driver or front seat

passenger is unbelted, the Seat Belt Reminder Light will

turn on and remain on until both front seat belts are

fastened. BeltAlert௡ triggers within 60 seconds of vehicle

speed over 5 mph (8 km/h). The reminder sequence lasts

for 96 seconds or until the respective seat belts are

fastened. After the sequence completes, the Seat Belt

Reminder Light remains illuminated until front belts are

fastened. The driver should instruct all other occupants

to fasten their seat belts. If a front seat belt is unbuckled

while traveling at speeds greater than 5 mph (8 km/h),

BeltAlert௡ will chime as a single notification and illumi-

nate the Seat Belt Reminder Light, then will proceed to

the 96 second reminder sequence.

2

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 53

Advertising