Ram Trucks MEDIA CENTER 430N for Jeep User Manual
Page 83
Connect a 3.5 mm stereo mini-jack cable as shown above
(not provided with the radio) to the Audio Jack connector
on the radio and to the earphone connector of your audio
device.
The display will switch automatically to the AUX mode
when a 3.5 mm stereo mini-jack cable has been connected.
The radio screen will revert back to the last tuner mode
when the cable is unplugged.
To change radio modes while the cable is connected to
the unit, press the MEDIA hard-key to display the AUX
tab. Touch the AUX tab to return to the AUX mode.
Adjust the volume with the ON/OFF VOLUME rotary
knob or with the volume of the attached device.
The control of the external device (e.g., selecting playlists,
play, fast forward, etc.) cannot be provided by the radio;
use the device controls instead.
NOTE:
Inserting of a mono jack will result in improper
audio playback.
82
MEDIA CENTER 430/430N (RBZ/RHB)