Using the remote control, Using the touchscreen radio controls, Listen to an audio source on channel 2 – Dodge 2014 Journey - Owner Manual User Manual

Page 355: While a video is playing on channel 1

Advertising
background image

When connecting an external source to the AUX input, be
sure to follow the standard color coding for the VES™
jacks:

NOTE:

Certain high-end video games, such as Playsta-

tion3 and XBox360 will exceed the power limit of the
vehicle’s Power Inverter. Refer to the Power Inverter
section in your vehicle’s Owner’s Manual for more
information.

Ensure the remote control channel selector switch and
Headphone switch (IR channel) are the same number.

Using The Remote Control

1. Press the MODE button on the Remote Control.

2. While looking at the video screen, highlight VES AUX

2, by either pressing Up/Down/Left/Right buttons or
by repeatedly pressing the MODE button, then press
ENTER on the Remote Control.

Using The Touchscreen Radio Controls

1. Touch the “MORE” soft-key.

2. Touch the “Rear Entertainment” soft-key to display

the Rear Entertainment Controls.

3. If the Rear Entertainment is turned off, touch the

“Power” soft-key.

4. Touch the “1” or “2” soft-key for the channel desired

and press the “Source” soft-key to select the desired
mode.

Listen To An Audio Source On Channel 2 While A
Video Is Playing On Channel 1

Ensure the Remote Control and Headphone switch is on
Channel 2.

4

UNDERSTANDING YOUR INSTRUMENT PANEL

353

Advertising