Replacing the headphone batteries, Controls – Dodge 2014 Journey - Owner Manual User Manual

Page 363

Advertising
background image

Replacing The Headphone Batteries

Each set of headphones requires two AAA batteries for
operation. To replace the batteries:

• Locate the battery compartment on the left ear cup of the

headphones, and then slide the battery cover downward.

• Replace the batteries, making sure to orient them

according to the polarity diagram shown.

• Replace the battery compartment cover.

Controls

The headphone power indicator and controls are located
on the right ear cup.

NOTE:

The rear video system must be turned on before

sound can be heard from the headphones. To conserve
battery life, the headphones will automatically turn off
approximately three minutes after the rear video system is
turned off.

Changing The Audio Mode For Headphones

1. Ensure the Remote Control channel/screen selector

switch is in the same position as the headphone
selector switch.

NOTE:

• When both switches are on Channel 1, the Remote is

controlling Channel 1 and the headphones are tuned
to the audio of the VES™ Channel 1.

• When both switches are on Channel 2, the Remote is

controlling Channel 2 and the headphones are tuned
to the audio of the VES™ Channel 2.

2. Press the MODE button on the remote control.

3. If the video screen is displaying a video source (such

as a DVD Video), pressing STATUS shows the status
on a popup banner at the bottom of the screen.

4

UNDERSTANDING YOUR INSTRUMENT PANEL

361

Advertising