Keyless enter-n-go – Dodge 2014 Journey - Owner Manual User Manual

Page 39

Advertising
background image

3. Repeat steps 1 and 2 for the opposite rear door.

NOTE:

After disengaging the Child-Protection Door

Lock system, always test the door from the inside to
make certain it is in the desired position.

KEYLESS ENTER-N-GO™

The Passive Entry system is an enhancement to the
vehicle’s Remote Keyless Entry (RKE) system and a
feature of Keyless Enter-N-Go™. This feature allows you
to lock and unlock the vehicle’s door(s) without having to
push the RKE transmitter lock or unlock buttons.

NOTE:

• Passive Entry may be programmed ON/OFF; refer to

“Uconnect® Settings” in “Understanding Your Instru-
ment Panel” for further information.

• If wearing gloves on your hands, or if it has been

raining on the Passive Entry door handle, the unlock
sensitivity can be affected, resulting in a slower re-
sponse time.

• If the vehicle is unlocked by the RKE transmitter or

Passive Entry and no door goes ajar within 60 seconds,
the vehicle will re-lock and if equipped will arm the
security alarm.

To Unlock From The Driver’s Side:

With a valid Passive Entry RKE transmitter within 5 ft
(1.5 m) of the driver’s door handle, grab the driver’s front
door handle to unlock the driver’s door automatically.
The interior door panel lock knob will raise when the
door is unlocked.

2

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

37

Advertising