To activate, To deactivate, Headlight time delay – Dodge 2015 Challenger - Owner Manual User Manual

Page 143

Advertising
background image

To Activate

1. Turn the headlight switch to the AUTO headlight

position.

2. Push the multifunction lever away from you (toward

front of vehicle) to engage the high beam mode.

NOTE:

This system will not activate until the vehicle is

at or above 15 mph (24 km/h).
To Deactivate

1. Pull the multifunction lever toward you (or rearward

in car) to manually deactivate the system (normal

operation of low beams).

2. Push back on the multifunction lever to reactivate the

system.

Headlight Time Delay

This feature provides the safety of headlight illumination

for up to 90 seconds when leaving your vehicle in an

unlit area.
To activate the delay feature, turn OFF the ignition switch

while the headlights are still on. Then, turn off the

headlights within 45 seconds. The delay interval begins

when the headlight switch is turned off.
NOTE:

The lights must be turned off within 45 seconds

of turning the ignition OFF to activate this feature.
If you turn the headlights, park lights or ignition switch

ON again, the system will cancel the delay.
If you turn the headlights off before the ignition, they will

turn off in the normal manner.

3

UNDERSTANDING THE FEATURES OF YOUR VEHICLE 141

Advertising