Hid headlamps, Low beam headlamp, high beam headlamp, and, Park/turn lamp — models with high intensity – Dodge 2015 Challenger - Owner Manual User Manual

Page 561: Discharge (hid) headlamps — if equipped

Advertising
background image

3. Remove one fastener on the lower air box to remove

and access the rear of the headlamp assembly.

4. Reach behind the passenger headlamp assembly.
5. Remove the headlamp cover.
6. Turn the headlamp access cap counterclockwise to

remove.

7. Remove bulb by turn it counter clockwise and discon-

nect.

8. Install new bulb by turning it clockwise and reconnect.
9. Reinstall headlamp access cap by turning it clockwise

and then reinstall headlamp cover.

10. Reinstall engine air cleaner assembly.

Low Beam Headlamp, High Beam Headlamp, and
Park/Turn Lamp — Models with High Intensity
Discharge (HID) Headlamps — If Equipped

HID Headlamps
The headlamps are a type of high voltage discharge tube.

High voltage can remain in the circuit even with the

headlamp switch off and the key removed. Because of

this, you should not attempt to service a headlamp bulb
yourself. If a headlamp bulb fails, take your vehicle to
an authorized dealer for service.

WARNING!

A transient high voltage occurs at the bulb sockets of
HID headlamps when the headlamp switch is turned
ON. It may cause serious electrical shock or electro-
cution if not serviced properly. See your authorized
dealer for service.

7

MAINTAINING YOUR VEHICLE 559

Advertising