Loose fuel filler cap message, Vehicle loading, Vehicle certification label – Dodge 2015 Challenger - Owner Manual User Manual

Page 447

Advertising
background image

Loose Fuel Filler Cap Message

If the vehicle diagnostic system determines that the fuel

filler cap is loose, improperly installed, or damaged, a

”gASCAP” message will display in the odometer or a

“Check Gascap” message will display in the Driver

Information Display (DID). If this occurs, tighten the fuel

filler cap properly and press the TRIP ODOMETER

button to turn off the message. If the problem continues,

the message will appear the next time the vehicle is

started.
A loose, improperly installed, or damaged fuel filler cap

may also turn on the MIL. Refer to “Onboard Diagnostic

System” in “Maintaining Your Vehicle” for further infor-

mation.

VEHICLE LOADING

The load carrying capacity of your vehicle is shown on

the “Vehicle Certification Label”. This information

should be used for passenger and luggage loading as

indicated.
Do not exceed the specified Gross Vehicle Weight Rating

(GVWR) or the Gross Axle Weight Rating (GAWR).

Vehicle Certification Label

Your vehicle has a Vehicle Certification Label affixed to

the drivers side B-Pillar or the rear of the driver’s door.
The label contains the following information:
• Name of manufacturer
• Month and year of manufacture
• Gross Vehicle Weight Rating (GVWR)
• Gross Axle Weight Rating (GAWR) front

5

STARTING AND OPERATING 445

Advertising