Canon BJ-200ex - Manual (Page 63)

Orientation for your print job. You can use these options in
any combination. see the next section for more detailed
Information about the options.
6. Once you select the options you want to use, click on the OK
button to close the Canon BJ-200ex setup dialog box, and then
click on the OK button to close the Print Setup dialog box.
Selecting Printing Options
This section describes the printing options available to you
through the BJ-200ex printer driver.
If other options appear in the dialog box, they are provided by the
application you are using. Refer to that application's
documentation for more information.
Paper Size option
Click on the arrow next to the Paper Size setting to select
one of the following paper sizes from the drop down list:
When printing on envelopes or thick paper, make sure the paper
selection lever is set to the front position and the paper thickness
lever (inside the printer) is set to the right.
If you select User Defined Size, the Setup program displays
the following dialog box:
Select the unit of measure you are using (inches or
millimeters), and then specify the width and length of your
paper. The width can be from 4.1 to 8.5 inches (104.1 x