Canon BJ-200ex - Manual (Page 64)

215.9 mm). The length can be from 4.1 to 14 inches (104.1
x 355.6 mm).
Media Type option
Click on the arrow next to the Media Type setting to select
one of the following types of paper from the drop-down
list:
When you select the Media Type, the Windows driver
changes printer modes. You can experiment with different
settings to see the results you can achieve on different types
of media. You may find that you can produce higher
quality printing on plain paper using the Transparency
mode.Because each situation is different, Canon cannot
guarantee better output output for a particular medium
other than the recommended choices.
Plain Paper
This mode is for printing on ordinary paper. This selection
sets the dots generated by the printer to yield the highest
quality printed image for this type of paper with minimal
bleeding.
•
When you select Plain Paper, the Paper Source defaults to
Auto Sheet Feeder and the Print Quality defaults to Normal,
360 x 360 dpi.
•
When you are printing on plain paper, set the paper thickness
lever (inside the printer) to the left position.
Transparency
This mode is for printing on transparency stock. Use the
Canon Transparencies (Q07-0001-M1) to achieve the
highest possible color fidelity.
•
When you select Transparency, the Paper Source defaults to
Auto Sheet Feeder and the Print Quality defaults to Fine, 360
x 360 dpi.
•
When you are printing on transparencies, set the paper
thickness lever (inside the printer) to the left.
•
When manually feeding paper, change the Paper Source to
Manual Feed and make sure the paper selection lever is set to
the front position.
Paper Source option
Click on the arrow next to the Paper Source setting to
select one of the following paper sources from the drop-
down list: