Canon EOS 10D - Manual (Page 68)

68
Selecting AF Point
Automatic Selection
Display all the AF points in red.
•
Press the < > button, then turn the < > or
< > dial so that the viewfinder display looks as
shown in the illustration.
•
When you try to select an AF point beyond a
peripheral AF point, automatic focusing selection
will be set.
•
You can also set automatic AF point selection while
looking at the LCD panel.
Manual Selection
Display the desired AF point in red.
•
To select the AF point, see “Selecting an AF Point.”
(
→p.67)
•
The selection sequence when the < > and < >
dial is turned is shown below.
•
You can also select the AF point manually while
looking at the LCD panel.
With C.Fn-10-1, you can disable the AF point from flashing in red when focus is
achieved. (
→p.149)
Center AF point selected
Automatic
Selection
Automatic
Selection
Automatic Selection
Automatic Selection