Canon EOS 10D - Manual (Page 76)

76
Drive Mode Selection
Three drive modes are provided:
Single frame: Only one shot is taken when you press the shutter button.
Continuous shots are taken while you hold down the shutter button fully.
Self-timer: The self-timer starts when you press the shutter button fully.
The image is captured 10 sec. later. (
→p.77)
Continuous:
•
In the < > mode, the above figures will apply regardless of the C.Fn-08 setting.
•
Figures for the continuous shooting speed and maximum burst are based on Canon’s
standard testing conditions (1/250 sec. and faster shutter speeds and ISO 100).
Press the < > button. ( ) 1
Select the drive mode.
•
While looking at the LCD panel, turn the < > dial
to set the desired drive mode.
: Single frame
: Continuous
: Self-timer
•
To return to shooting, press the shutter button
halfway.
2
Image-Recording Quality
/ / / / /
Continuous Shooting Speed
One Shot AF AI Servo AF
Maximum Burst
Approx. 3 fps Approx. 9 shots