CDA DV 990 - Manual (Page 14)

14
Turning the Oven On and Off
To turn the oven ON:
– Touch the key “
” and hold until “On” appears on the clock/programmer display.
– You can now operate your oven. The time of the day appears on the clock/programmer display (followed
by the programme number “Pr01, Pr02, ...”).
To turn the oven OFF:
– Touch the key “
” and hold until “OFF” appears on the clock/programmer display.
– The oven is turned off (“stand-by” condition) and the time of the day appears on the clock/programmer
display.
– 3 beeps indicate that the oven has been turned off.
To select the volume of the beeps, touch the “ ” key when the oven is turned off (”stand-by”
condition).
WARNING - IMPORTANT NOTE
Do not turn the oven off if you have set it for automatic or semi-automatic cooking. This
operation will cancel the programmed cooking.
Only the timer (minute minder) operates in the “stand-by” condition.
Oven Automatic Switch Off
– If you do not use your oven within 3 minutes, it automatically switches back to stand-by.
– When the oven is operating a cooking function it automatically switches back to stand-by after 10
hours.
– It is possible to remove the automatic switch off feature by selecting “A_SO” (by using the key “ ”
with the oven switched off) on the clock/programmer display and then touching the “ ” or “ ” key
to set “OFF”.
To reactivate the automatic switch off feature repeat the same procedure and set to “On”.
It is factory setted for “A_SO - On” (automatic switch off ON) and this option is also automatically
activated after a power failure.