CDA DV 990 - Manual (Page 42)

42
Replacing the Middle and Inner Panes of Glass
1. Make sure the door is locked open (see fig. 49).
2. Replace the middle pane:
– Check that the four rubber pads are in place (M in fig. 54).
– Check that you are holding the pane the correct way. You
should be able to read the wording on it as it faces you.
– Gently insert the top edge of the pane into the top clamps
(arrow 1 in fig. 55), then lower the pane and insert the
bottom edge into the bottom clamps (arrow 2 in fig. 55);
and then slide the pane into position (fig. 56).
M
1
2
1
Fig. 54
Fig. 55
Fig. 56
M
Models:
9Q6..
9Z6..