CDA DV 990 - Manual (Page 37)

37
Replacing the Inner Pane of Glass
1. Make sure the door is locked open (see fig. 24).
2. Replace the inner pane:
– Check that the four rubber pads are in place (D in Fig. 27).
– Check that you are holding the pane the correct way. You
should be able to read the wording on it as it faces you.
– Insert the pane in the left E and right F slide guides (fig. 28),
and gently slide it to the retainers H (fig. 29).
– Top oven door only: Reassemble the seal G in the correct
way (fig. 30) by hooking the no. 3 fixing hooks in the proper
holes (fig. 31).
– Unlock the oven door by opening it completely and closing
the lever A on the left and right hinges (Fig. 34).
A
Fig. 27
E
F
H
Fig. 29
H
G
Fig. 30
Fig. 31
It is normal the opened gap between
the top edge of the inner glass and the
sealed gasket. This allows the cooling
air circulation.
The top oven
door has a
sealed gasket in
the top part.
H
D
G
A
F
E
Fig. 28
Fig. 34
Fig. 32
Model:
DV 990..
The lower oven
door has not a
sealed gasket in
the top part.
Fig. 33