FRIGIDAIRE FPHG2399PF - Manual (Page 14)

14
CONTROLS
IQ-Touch TM
A red indicator light will be illuminated above most active features.
Touch the icon to activate the options below.
quick ice
Increases the production of ice
water filter Press and hold for three seconds to reset after filter change.
C/F Touch to toggle display from Fahrenheit to Celsius.
default settings Resets all refrigerator settings such as temp, temp display and tones
to their factory default settings.
Power on-off Press and hold for three seconds to turn off the cooling system to
clean the refrigerator. It also turns off the ice maker. The temperature
displays will read OFF.
Energy Saver Keep this switch set on energy saver (light on) for lowest energy
usage. If moisture appears on the cabinet between the doors,
pressing this button will turn the light off and enable an electric heater
used to reduce moisture on the cabinet between the doors.
Setting cooling temperatures
Press the “∧” or “∨” indicator to adjust the temperature to the desired setting.
The temperature display will begin to blink with the first touch. The display will time out
after 10 seconds and return to the basic display.
Alarms
Door Ajar If the door has been left open for an extended period of time, an
alarm will sound and the door ajar indicator will display on the bot-
tom display of the control panel. The alarm is turned off by closing the
door. The mute sounds key will blink to prompt the reset of any active
alarms. Press this key to reset any system alarms.
High Temp In the event of a high temperature condition, the temperature display
will blink and display “HI”. After 20 minutes, the alarm will sound and
the high temp indicator will be red on the bottom of the control pan-
el. The mute sounds icon will illuminate until pressed, acknowledg-
ing the alarm, at which time the highest temperature reached will be
displayed and the refrigerator will resume normal operation. In case
the high temp alarm is not acknowledged at the first alarm sound time
out, when the door is first opened, the alarm sound will be repeated.
Power Fail In the event of a power failure, the power fail alert will be displayed
and the temperature display will blink until the mute sounds icon is
pressed, acknowledging the alarm. Other modes may be turned off
until the alarm is acknowledged. The power fail alert is turned off
and the refrigerator will resume normal operation. The high temp
alarm may also be illuminated until a safe operating range
temperature has been reached.
IMPORTANT
Pressing the system on-off icon does not turn off power to your refrigerator. You
must unplug the power cord from the wall outlet.