Acronis Snap Deploy 4 - User Guide User Manual
Page 109
109
Copyright © Acronis International GmbH, 2002-2012
To perform deployment to the specific machines (p. 101) that do not support the Wake-on-LAN
functionality
You can boot the machines by using a bootable media or Acronis PXE Server.
To boot a target machine
1. Do one of the following:
Create a bootable media (p. 60) with Acronis Snap Deploy 4 Agent.
OR
Connect the management console to Acronis PXE Server and upload Acronis Snap Deploy 4
Agent (p. 66).
Tip: When creating the bootable media or uploading the agent to the PXE server, you can configure the
agent to start automatically after a time-out.
2. Boot the target machine into Acronis Snap Deploy 4 Agent from the bootable media or the PXE
Server.
The boot menu on the target machine’s side
3. Select Acronis Snap Deploy 4 Agent in the boot menu. You can skip this step if you configured the
agent to start automatically.
4. [Optional.] Choose whether you want to configure the agent. The agent configuration includes
the network settings and the address of Acronis Snap Deploy 4 OS Deploy Server. A dialog box
comes up suggesting that you configure the agent.