Acronis Snap Deploy 4 - User Guide - Manual (Page 33)

33 Copyright © Acronis International GmbH, 2002-2012
6. Select the volumes that you want to include in the master image. You can leave the default
selection, which normally includes the volumes that contain the operating system.
7. Specify a folder on the USB hard disk where you want to save the image.
Alternatively, specify a network folder, and the user name and password to access that folder.
8. Keep clicking Next until the summary screen appears. Click Create in that screen.
Acronis Snap Deploy 4 starts creating the image.
After the image is created, the machine will restart.
Step 5. Performing deployment
In this step, you will deploy the created master image to a single machine (the target machine).
Tip: For getting started, we recommend performing deployment to the same machine from which you created
the image, or to a machine with identical hardware. This way, no extra steps, such as using the Universal
Deploy option, are required.
Preparing the target machine
On the target machine, do the following: