Acronis Snap Deploy 4 - User Guide - Manual (Page 70)

70 Copyright © Acronis International GmbH, 2002-2012
4. Depending on your choice in step 2, boot the master machine into Acronis Snap Deploy 4 Master
Image Creator from the bootable media or from the PXE server.
The boot menu appears on the master machine.
The boot menu on the master machine
5. In the boot menu, click Acronis Snap Deploy 4 Master Image Creator.
6. The master image creator establishes a network connection to be able to save the image in a
network folder. A dialog box appears asking whether you want to configure the network
connection that will be used by the image creator.
By default, Acronis Snap Deploy 4 Master Image Creator uses DHCP auto configuration. Ignore
the prompt (click Cancel) if there is a DHCP server on the network or the image has to be placed
on a local hard disk or a removable media.
Prompt for configuring the master image creator
The master image creator can be preconfigured to apply the default network settings
automatically after a time-out.