Acronis Snap Deploy 4 - User Guide - Manual (Page 34)

34 Copyright © Acronis International GmbH, 2002-2012
1. Make sure that the CD or DVD drive has a higher boot priority than the hard disk drive. You may
need to open the BIOS setup utility of the machine and adjust the boot priority setting.
2. Boot the machine from the bootable media you created.
3. On the boot menu, click Acronis Snap Deploy 4 Agent.
4. In the pop-up window, click Cancel or wait until that window closes.
5. Make sure that the machine is ready for deployment. The window should look similar to the
following picture.
Details. The target machine becomes ready for deployment when it connects to Acronis Snap
Deploy 4 OS Deploy Server. This server is part of Acronis Snap Deploy 4. If the machine does not
connect to the server, you may need to adjust network settings, as described in “Booting the
target machines” (p. 108).
After the target machine is ready, you can deploy the master image to it.