FRIGIDAIRE FGRU19F6QF - Manual (Page 7)

7
wrench and one screw with a Phillips screwdriver.
Shift the doors until parallel, then retighten the
screw and bolts securely. (See illustration below.)
Door
Raise
Door
Raise
Door
Slotted Hinge
Adjustment
⅜” bolts
Freezer Refrigerator
Screw
Door
To install the shelf grommet to the shelf:
1. With the wire shelf installed, press the
shelf grommet down onto the wire that is
anchored into the freezer wall. Be sure to
keep the larger end of the shelf grommet
away from the wall.
3. Slide the shelf grommet into the grommet
already in the freezer wall until it is flush.
INSTALLATION
To install the handle clips to the basket:
1. Place the basket on a firm, flat surface.
2. With the narrow side of the handle clip on
the inside of the basket, snap the handle
clip to the recessed area in the basket.
Lower Hinge Adjustment for Leveling
the Doors of the Matching Refrigerator /
Freezer Pair
To level the doors using the adjustable lower
hinge (some models):
1. If the refrigerator door is lower than the
freezer door, raise the refrigerator door by
turning the adjustment screw clockwise
using a 7/16” socket wrench. (See
illustration below.)
2. If the freezer door is lower than the
refrigerator door, raise the freezer door by
turning the adjustment screw clockwise
using a 7/16” socket wrench. (See
illustration below.)
2. Push the shelf grommet onto the wire until
it snaps in place.