FRIGIDAIRE FGRU19F6QF - Manual (Page 9)

9
Setting the PRO-SELECT™ Electronic Control
Cool Down Period
For safe food storage, allow 4 hours for refrigerator to cool down completely. The refrigerator will run
continuously for the first several hours.
Pro-Select™ Electronic Control
The Pro-Select™ Electronic Control is located inside the refrigerator. Temperature is factory preset to
provide satisfactory food storage temperatures. However, the temperature control is adjustable to
provide a range of temperatures for your personal satisfaction.
°F
PRO-SELECT™ Electronic Control Features
Replace Air Filter
When the “REPLACE AIR FILTER” LED is illuminated yellow, the air filter needs to be replaced. The
control will signal for air filter replacement after 3600 hours of refrigerator operation. After replacing
the air filter, reset the air filter timer by pressing the AIR FILTER key for 3 seconds. The “REPLACE
AIR FILTER” LED will be illuminated green for 3 seconds, confirming a timer reset.
°F
ELECTRONIC CONTROL
To adjust the temperature setting, press the UP () key for warmer temperature and DOWN ()
key for colder temperature on the control panel. Allow several hours for the temperature to stabilize
between adjustments. The refrigerator can be adjusted between 33°F (1°C) and 46°F (8°C). By
pressing the TEMP MODE key, the temperature display will toggle between °F and °C.
To turn the refrigerator OFF, press the UP () key until the warmest temperature setting of
46°F (8°C) shows in the display. Then press the UP () key 3 times within 3 seconds to turn the
refrigerator OFF. The display will then show “OF”. To turn the unit back ON, press the DOWN ()
key 3 times within 3 seconds. The control will then display “46°F (8°C)” and may be adjusted to the
desired temperature.