Dell C/Port II APR User Manual
Page 15
D e l l L a t i t u d e C / Po r t I I A P R S y s t e m I n f o r m a t i o n G u i d e
13
Docking for the First Time With Windows XP and Windows 2000
1
Dock and turn on your computer.
2
Press <F2> during the system boot routine to view the system setup
program.
3
Set Docking IRQ to Optimized.
4
Set Universal Connect to Enabled.
5
Exit the system setup program.
Your system will continue the boot process.
In Windows 2000, the Add New Hardware Wizard appears.
NOTE: If your computer is running Windows XP, the operating system
automatically installs the drivers. If your computer is running Windows 2000,
the
Add New Hardware Wizard automatically installs your drivers.
Docking for the First Time With Windows Me
1
Dock and turn on your computer.
2
Press <F2> during the system boot routine to view the system setup
program.
3
Set Docking IRQ to Optimized.
4
Set Universal Connect to Enabled.
5
Exit the system setup program.
Your system will continue the boot process.
The Add New Hardware Wizard appears.
6
Select Search for the Best Driver for Your Device (Recommended)
and click Next.
7
Click Next.
8
Follow the prompts on the Add New Hardware Wizard.
9
Whenever prompted, select Search for the Best Driver for Your
Device (Recommended) and click Next.
10
Continue to follow the prompts to complete the installation.
The Windows desktop appears and the installation is complete.
3G4802.book Page 13 Thursday, October 18, 2001 4:20 PM