Versarails rack kit contents, Installation tasks, Figure 1-2 – Dell PowerEdge SC1425 User Manual
Page 10
1-8
Rack Installation Guide
VersaRails Rack Kit Contents
•
One pair of VersaRails mounting rails
•
10-32 x 0.5-inch flange-head Phillips screws (8)
•
Releasable tie wraps (2) (not shown in Figure 1-2)
NOTE:
The nonmetric screws described in illustrations and in procedural steps are identified by size and
number of threads per inch. For example, a #10 Phillips-head screw with 32 threads per inch is identified
as a 10-32 screw.
Figure 1-2.
VersaRails Rack Kit Contents
Installation Tasks
Installing a rack kit involves performing the following tasks (described in detail in subsequent
sections) in their numbered order:
1
Removing the rack doors
2
Marking the rack
3
Installing the mounting rails in the rack
•
RapidRails installation
•
VersaRails installation
10-32 x 0.5-inch
flange-head Phillips
screws (8)
mounting rails (2)
releasable tie wrap attachment points (2)