Dell PowerEdge 850 - Manual (Page 11)

Rack Installation Guide
9
Figure 1-2. VersaRails Rack Kit Contents
Installation Tasks
Installing a rack kit involves performing the following tasks (described in detail in subsequent
sections) in their numbered order:
1 Removing the rack doors
2 Marking the rack
3 Installing the mounting rails in the rack
• RapidRails installation
• VersaRails installation
• Static Rails Installation
4 Installing the system in the rack
5 Routing cables and securing with releasable tie wraps
6 Replacing the rack doors
NOTE:
Three procedures are provided for task 3. These procedures are for the RapidRails kit,
the VersaRails kit, and the Static Rail kit.
10-32 x 0.5-inch flange-
head Phillips screws (8)
mounting rails (2)
releasable tie wrap
attachment points (2)