Dell PowerEdge 850 - Manual (Page 19)

Rack Installation Guide
17
Installing the Releasable Tie Wraps
The two releasable tie wraps are used to secure your system’s cables to the mounting rails.
1 Locate the releasable tie wrap attachment points located on the two back mounting-bracket
flanges (see Figure 1-9).
Figure 1-9. Installing the Releasable Tie Wraps
2 Push the tie wrap’s fastener through the attachment point.
3 Push the tie wrap’s plunger until it snaps to secure the tie wrap to the mounting rail.
4 Using the releasable tie wrap, secure your system’s cables to the mounting rail.
mounting rails (2)
releasable tie wraps (2)