Dell PowerEdge Rack Enclosure 2420 - Manual (Page 16)

14
Installation Guide
Figure 1-6. Reversing the Top and Bottom Hinges
g Locate the top bolt holes in the right side of the rack, and fasten
the hinge body to the right side of the rack with the Allen bolts.
h Insert the spring between the top and bottom hinge-pin holes
in the bottom hinge body.
i Slide the hinge pin into the hinge body.
j Insert the retention clip through the hinge so that the retention clip
is below the spring.
1 hinge pin 2 top hinge body
3 spring 4 retention clip
5 hinge post 6 bottom hinge body
7 front of rack
2
3
4
1
5
6
7