Dell PowerEdge Rack Enclosure 2420 User Manual
Page 21
Advertising
Installation Guide
19
1 Using a screwdriver, lower the leveling foot until it rests on the floor.
2 If you need to lower the foot further, tighten the hex nut clockwise
with a 12-mm wrench (see Figure 1-10).
Figure 1-10.
Adjusting the Leveling Feet
3 Repeat steps 1 and 2 for the remaining leveling feet.
4 Ensure that the rack is level.
1
leveling foot stem
2
hex nut
3
leveling pad
3
1
2
Advertising