Dell PowerEdge Rack Enclosure 2420 User Manual
Page 18
Advertising
16
Installation Guide
7 Reverse the lock catch.
a
Unscrew the two Phillips screws that hold the lock catch to the rack’s
vertical frame member.
b
Remove the lock catch and rotate it 180 degrees.
c
Reinstall the lock catch on the other rack front vertical frame member
by aligning the holes of the catch with the holes of the frame member
and then reinserting the two Phillips screws.
Figure 1-8.
Reversing the Front Door Lock Catch
1
lock catch
2
screws
1
2
Advertising