Carrier AIR-COOLED CONDENSER UNITS 09BY006-024 - Manual (Page 5)

NOTES:
1. Operational clearances are 0 in. on all sides of the unit.
2. Service clearances are 0 in. (minimum) on the top, rear, and front
of the unit. A minimum of 3 ft service clearance is required on the
unit right side, and a 3 ft clearance is recommended on the left
side (2 ft is the minimum). One side of the unit (either right, left, or
rear) should have the following minimum clearance for removal of
the blower shaft:
UNIT
SIZE
APPROX. SHAFT LENGTH
(in.)
006 41.0
008 47.0
012 51.0
014 51.0
016 55.5
024 73.0
Fig. 3 — Base Unit Dimensions (cont)
CORNER WEIGHTS (Lb)
UNIT
SIZE
A B C D
006 55 73 59 42
008 61 89 73 44
012 86 114 93 64
014 107 142 114 78
016 123 159 127 91
024 132 195 158 95
5