Dell PowerEdge Rack Enclosure 4820 User Manual
Page 13
Advertising
Installation Guide
11
2 Remove the right back door.
a
While supporting the door, pull the pin for the top hinge out of the
door’s hinge-pin housing (see Figure 1-3).
You will hear a click sound as you pull the pin out of the door’s
hinge-pin housing. The hinge pins are designed to prevent them
from being pulled out of the hinge body.
b
Repeat step a for the bottom hinge.
c
Pull the door away from the rack.
Figure 1-3.
Removing the Back Doors
WARNING:
Due to the size and weight of the door, it is recommended that you lay
the removed door flat with its outer surface facing upward.
1
hinge pin
2
hinge body
3
hinge-pin housing
1
2
3
Advertising